Power on (and off) computers remotely from a web page.

With this service it is no longer necessary to leave your computer switched on in case you could need it at night, over the weekend or when traveling.

The service can be accessed at https://apps.citius.usc.es/wakeonlan/.

When loading the web page a list of the computers you are allowed to power on or off will appear and as their actual power status will be shown. You should see at least your own computer (max. one computer per jack) as well as any server with automatic power off configured and to which you have access granted.

Dependent on the current status of each computer you will be able to power them on or off:

• Off indicator(grey): Computer is switched off, you can send the power on signal to it pressing the button. There is no way of knowing whether it powers on correctly until it has finished off booting, so the service checks the computer status in one minute intervals. If after a while the status indicator is still off(grey) then the computer probably has the wake on lan option deactivated in the BIOS or in the network interface.
• On indicator (fixed blue): Computer is powered on, you can switch it off pressing the button. Only works in computers that have the CITIUS Ubuntu installed, others will show an error message. Servers with automatic power off configured can't be manually switched off and the button will be grayed out.
• Working indicator (flashing blue): The computer is being switched on or off presently and nothing can be done. The indicator will remain like this for a minute and a half after switching on or off the computer.

Press the Logout button to close the current session.

This can happen for several reasons:

• The computer is stuck in some point at the boot sequence (BIOS, GRUB menu, etc.) and needs manual intervention.
• The computer is disconnected from the network.
• The computer has incorrectly configured Wake on lan. This can happen the first time you use this service. Get in touch with IT Infrastructure Unit using citius.tic@usc.es.

O sistema non ten forma de comprobar se o equipo está encendendo de verdade, polo que tras enviar o sinal de encendido, agarda un minuto e medio antes de volver a mostrar o estado real. Se pasado ese minuto e medio o equipo aínda non encendeu, pero remata máis tarde, é posible que o indicador volva ó estado de apagado durante uns segundos e, unha vez encendido, apareza finalmente o estado correcto.

Esto pode ser debido a que o sistema quedou atascado nalgunha secuencia de apagado e requira intervención manual.

Algúns equipos non se poden apagar ou encender, e estando encendidos ou apagados terán o botón deshabilitado, dependendo das accións que estén permitidas.

Avisa á Unidade de Xestión de Infraestruturas TIC en citius.tic@usc.es. Os equipos asígnanse manualmente e é posible que haia algún erro.